Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

CORPORATE

17/11/2014

Contact
info@speag.swiss

 

Spectacular Applied Research (SAR) – 2014 National Future Day

Thursday, November 13 was 2014 Future Day at Z43, and eleven curious and enthousiastic young adults spent a day visiting our team at IT’IS, SPEAG, and ZMT laboratories.

 
MEASUREMENT

15/11/2014

Contact
info@speag.swiss

 

Special Discount for iSAR to cSAR3D

We are pleased to offer an attractive discount for the upgrade of iSAR to cSAR3D. cSAR3D meets the advancing needs of customers for fast and high-precision SAR testing. 

 
MEASUREMENT

28/10/2014

Contact
info@speag.swiss

 

ICEy (Interference & Compatibility Evaluation System) Release

SPEAG is excited to announce the introduction of our novel ICEy Interference & Compatibility Evaluation system, another decisive leap forward in EMC/EMI near-field scanning technology.

 
MEASUREMENT

17/10/2014

Contact
info@speag.swiss

 

ISO/IEC 17025 Accreditation for Calibration

ISO/IEC 17025 Accreditation for Calibration of cSAR3D and TDS Awarded!

 
MEASUREMENT

16/08/2014

Contact
info@speag.swiss

 

cSAR3D Demo Video and Accreditation & Software Release Schedule

With the steady shipment of one cSAR3D FLAT unit per week successfully underway, SPEAG is now ready to ramp up cSAR3D HEAD production with the goal of also shipping three to four calibrated HEAD units per month. A demo video highlighting the exceptional functionality and user-friendliness of the system, including the new camera modules, is now available.

 
SIMULATION

01/08/2014

Contact
semx-support@speag.swiss

 

ZMT Zurich MedTech AG: Sim4Life V1.0 Released

Four years in the making, the next great alliance between engineering, medicine, technology, and design was forged with the launch of our new revolutionary simulation platform Sim4Life V1.0.

 
MEASUREMENT

14/07/2014

Contact
info@speag.swiss

 

cSAR3D V1.2 Release

SPEAG is pleased to announce the release of cSAR3D software version 1.2.  New features include improved 3D extrapolation, continuous measurement mode, and several enhancements of the graphical user interface. We are in full production with deliveries of two to four units per month.

 
SIMULATION

10/07/2014

Contact
semx-support@speag.swiss

 

SEMCAD X v14.8.6 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.8.6, an update of SEMCAD X Aletsch v14.8.

 
CORPORATE

08/07/2014

Contact
info@speag.swiss

 

SPEAG at MEDIX in Tokyo

ZMT Zurich MedTech AG and SPEAG joined Japanese partner PTT Company Limited as exhibitors at the 5th Medical Device Development & Manufacturing Expo (MEDIX) in Tokyo, June 25 – 27, 2014.

 
MEASUREMENT

03/07/2014

Contact
info@speag.swiss

 

New DAK Software Version 1.12

SPEAG is delighted to announce the latest release of our DAK software, Version 1.12. The new and improved features and tools of this release accelerate dielectric measurements and optimize data evaluation.

 
Page 17 of 29
 
 
Latest News