Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

CORPORATE

19/03/2015

Contact
info@speag.swiss

 

SPEAG’s Full-Body EM Phantom, “POPEYE”, Takes Center Stage in Defining the Road Ahead for Wearable Device Testing

SPEAG’s research partner, the IT'IS Foundation, and the Wireless Research Center of North Carolina have joined forces to define next generation phantom testing in the emerging market for wearable devices. SPEAG's full-body phantom "POPEYE" and other EM phantoms intended towards standards development will be deployed.

 
MEASUREMENT

18/03/2015

Contact
info@speag.swiss

 

BIS Adopts the Indian Standard for Mobile Phone Handsets: Safety Requirements: IS16333 (Part 1):2015

BIS, the National Standards Body of India, has adopted Standard IS16133 (Part1):2015.

 
MEASUREMENT

16/03/2015

Contact
info@speag.swiss

 

cSAR3D V2.0 Release

The innovation continues with SPEAG's release of cSAR3D V2.0. This release fully integrates all cSAR3D phantom types: Flat, Left Head, Right Head and Quad. Shipments of cSAR3D Quad started in November 2014 and have far exceeded our expectations. SAR measurement of simultaneous transmisson is supported, as is base station simulator automation with both CMU200 and CMW500 from Rohde & Schwarz.

 
MEASUREMENT

23/02/2015

Contact
info@speag.swiss

 

 
MEASUREMENT

15/02/2015

Contact
info@speag.swiss

 

Progress for IEC 62209-3 Standard in San Francisco

Significant progress at recent IEC 62209-3 meeting in San Francisco resulted in agreement on broad acceptance of vector array systems such as cSAR3D, and rigorous protocols for validation and uncertainty.

 
MEASUREMENT

16/01/2015

Contact
info@speag.swiss

 

cSAR3D Quad Release

cSAR3D Quad is ideal for fast and accurate SAR testing of laptops, tablets and other large devices. In November and December 2014, several cSAR3D Quad systems were shipped and installed at customer sites, with many more scheduled to ship in early 2015. SPEAG is very pleased with the popularity and initial demand for cSAR3D Quad among our customers. 

 
CORPORATE

31/12/2014

Contact
info@speag.swiss

 

Successful SPEAG exhibtions and workshops during 2013

SPEAG successfully participated on multiple international conferences and exhibitions during 2013.

 
CORPORATE

25/11/2014

Contact
info@speag.swiss

 

20 Years SPEAG & 15 Years IT'IS

The red carpet was rolled out at the Volkshaus at Helvetiaplatz on the evening of Friday, November 21st to welcome attendees of the jubilee party to celebrate the 20th anniversary of SPEAG and the 15th anniversary of the IT’IS Foundation.

 
SIMULATION

24/11/2014

Contact
semx-support@speag.swiss

 

SEMCAD X @ IEEE International Symposium on Telecommunication Technologies 2014

A tutorial course abut Antenna design for Small MIMO Terminals featuring SEMCAD X was held in Malaysia.

 
SIMULATION

18/11/2014

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Final Release

SPEAG is pleased to announce the final release of SEMCAD X Matterhorn V15.0. Over the past three years, a complete overhaul of the previous version of SEMCAD X was undertaken, including improvements to all of its industry leading features; the replacement of inefficient and uncompetitive components; and the creation of the most modern user interface.

 
Page 16 of 29
 
 
Latest News