Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

CORPORATE

22/01/2016

Contact
info@speag.swiss

 

Let’s Party! Festivities to Kick Start 2016!

This year’s party of Z43 (IT'IS Foundation, SPEAG, ZMT) was held at trendy Art Dock, located in the former freight terminal between Zurich’s Hardbrücke and Central train stations.

 
SIMULATION

08/12/2015

Contact
semx-support@speag.swiss

 

SEMCAD Matterhorn V15.6 Released

The SEMCAD X Team is pleased to announce the release of SEMCAD Matterhorn V15.6, an update of SEMCAD Matterhorn  V15.4.

 
CORPORATE

12/11/2015

Contact
info@speag.swiss

 

National Future Day 2015 – Wireless Power Transfer with the Kids “Wonderful and Powerful Team”

Thursday, November 12 was 2015 Future Day at Z43, and six engaged and curious youngsters spent the day visiting our team at IT’IS, SPEAG, and ZMT laboratories.

 
MEASUREMENT

04/11/2015

Contact
info@speag.swiss

 

SPEAG Strongly Recommends Regular Recertification of OTA Hand Phantoms

On the basis of careful investigation of used hand phantoms that have been returned to our labs, SPEAG strongly recommends recertification of all SHO hand phantoms after at most 3 years of use or in the case of any visible damage.

 
MEASUREMENT

26/10/2015

Contact
info@speag.swiss

 

DAKS-12, SPEAG’s New Portable DAK System for Lower Frequencies

SPEAG is pleased to announce the release of our latest portable dielectric measurement system, the DAKS-12, which combines SPEAG’s DAK-12 probe with a handheld single-port ShockLine MS46121A vector network analyzer from Anritsu. The easy-to-use DAKS-12 is designed for very robust dielectric measurements in the frequency range of 10 MHz – 3 GHz.

 
CORPORATE

23/10/2015

Contact
info@speag.swiss

 

Successful SPEAG / ZMT Hardware and Software Workshop in Korea

ZMT Zurich MedTech AG and SPEAG hosted the annual Hardware and Software Workshop in Korea on October 23, 2015, with Dymstec, SPEAG’s distribution partner in Korea, as the local organizers of this popular event. Approximately 200 participants attended the workshop to preview ZMT’s and SPEAG’s latest innovations and product updates and to learn about the roadmap for future technological advances in 2015 and beyond. 

 
MEASUREMENT

23/10/2015

Contact
info@speag.swiss

 

Review of Fast SAR in Microwave RF Technology China

SPEAG products cSAR3D and DASY6 are featured in a recent issue of Chinese journal Microwave and Radiofrequency Technology. 

 
MEASUREMENT

04/10/2015

Contact
info@speag.swiss

 

cSAR3D V2.4 Release - Reduced Uncertainty

SPEAG continues to advance the state of the art for precise and fast SAR measurement with the release of cSAR3D V2.4. The implementation of new calibration techniques and reconstruction algorithms has significantly improved the measurement accuracy. Modulation analysis and standards-compatible fast SAR protocols are also new in this release.

 
MEASUREMENT

01/09/2015

Contact
info@speag.swiss

 

DAK Verification Kit

In response to numerous customer requests, SPEAG has developed the DAK Verification Kit for quick and easy verification of the Dielectric Assessment Kit system. The characterized liquid in the Verification Kit will be measured and compared to the imported target data after system calibration, ensuring reliable performance and results.

 
SIMULATION

17/07/2015

Contact
semx-support@speag.swiss

 

SEMCAD Matterhorn V15.4 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD Matterhorn V15.4, a major update of SEMCAD Matterhorn  V15.0.

 
Page 14 of 29
 
 
Latest News