Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

MEASUREMENT

13/07/2016

Contact
info@speag.swiss

 

cSAR3D V2.6 Release - Faster Automation

Our new cSAR3D software release 2.6 features a further improved reconstruction algorithm, more precise determination of the peak spatial SAR close to the border of the sensor array, and faster and more reliable handovers of 2G, 3G and 4G signals. We are also pleased to announce that this quarter we are releasing both automated testing of devices with dynamic antenna tuners and autonomous DUT positioning based on DASY robots with integrated camera and device charger. 

 
MEASUREMENT

01/07/2016

Contact
info@speag.swiss

 

ISO/IEC 17025 Accreditation for Calibration

ISO/IEC 17025 Accreditation for Calibration of probes & validation sources extended down ot 4 MHz and Calibration of dielectric materials awarded

 
MEASUREMENT

31/03/2016

Contact
info@speag.swiss

 

DASY Measurement Protocol for Capacitively Coupled SAR Distribution

SPEAG recommends an updated measurement protocols for compliance testing with DASY52 to account for new technology trends and regulator requirements. cDASY6 will have a more advanced automated approach.

 
MEASUREMENT

21/03/2016

Contact
info@speag.swiss

 

Chinese OTA Hand Phantoms

Release of the first Chinese OTA hand phantom developed in collaboration with HWA-Tech for the Chinese Academy of Broadcasting Planning (ABP).

 
CORPORATE

11/03/2016

Contact
info@speag.swiss

 

SPEAG Fast SAR Solutions Featured at MIC MRA Workshop in Tokyo

The performance of SPEAG’s products for fast measurement of specific absorption rate (SAR) – DASY6 and cSAR3D – were featured in a presentation by Prof. Niels Kuster at the MIC MRA International Workshop held March 2 – 3, 2016 in Tokyo hosted by the Japanese Ministry of Internal Affairs and Communications.

 
SIMULATION

08/03/2016

Contact
semx-support@speag.swiss

 

SEMCAD Matterhorn V15.6.3 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD Matterhorn V15.6.3, an updated version of SEMCAD Matterhorn  V15.6.

 
MEASUREMENT

23/02/2016

Contact
info@speag.swiss

 

Still Groovin’ to the E-Field Probe Blues by Prof. Howard Bassen

The first paper to describe the design and fabrication of a miniature broad-band electric field probe was published more than 40 years ago in the Annals of the New York Academy of Sciences, Biological Effects of Nonionizing Radiation.

 
MEASUREMENT

10/02/2016

Contact
info@speag.swiss

 

Anritsu MT8820C Integrates with DASY6 and cSAR3D

Anritsu Corporation’s MT8820C Radio Communication Analyzer now integrates with both DASY6 and cSAR3D from Schmid & Partner Engineering AG (SPEAG) to provide seamless Specific Absorption Rate (SAR) compliance testing that significantly reduces assessment costs and maximizes flexibility.

 
MEASUREMENT

06/02/2016

Contact
info@speag.swiss

 

Notice: Limited warranty on phantoms

Important notice to avoid shell degradation of SPEAG phantoms due to exposure to aggressive liquids.

 
CORPORATE

04/02/2016

Contact
info@speag.swiss

 

IT'IS/Speag/ZMT Retreat in Melchsee-Frutt on Mastering Sales/Funding, Spotting Trends and Shaping the Future

Twenty IT'IS Foundation, SPEAG, and ZMT co-workers convened for two-day retreat, 01 – 02 February 2016, held at the Hotel Frutt Lodge & SPA, in Melchsee-Frutt, Canton Obwalden. The goal of the retreat was to learn how to spot trends and become a trend setter, to master sales, to assess the current status of the organization, and to establish measures for improvement.

 
Page 13 of 29
 
 
Latest News