Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

MEASUREMENT

10/01/2017

Contact
info@speag.swiss

 

New Free-Space Probes for Precise Near-Field Characterization from 4 – 30 MHz

Novel magnetic and electric field probes suited for precise measurements in the closest vicinity of WPT systems or other sources operating in the low MHz range.

 
MEASUREMENT

29/12/2016

Contact
info@speag.swiss

 

cSAR3D Release V2.8

In response to several user requests, SPEAG has added a quick and intuitive measurement setup feature to its cSAR3D software that is optimal for quick & easy measurements as needed in R&D applications or for special analyses. A new remote interface now provides an exceptional level of convenience for QA testing by allowing sites to use their own automated test software and analysis tools, and extending scalability to multi-site environments.

 
SIMULATION

21/12/2016

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Release V16.2

This SEMCAD X release represents a breakthrough in efficiency. Thanks to its new GPU empowered sub-gridding method, simulations that were impossible to solve can now been solved in a few hours. After a year of devising the essential software infrastructure for the most advanced optimizers, SPEAG is proud to announce the release of a preview version of the Sweeper. Exploit its possibilities right away! In addition, we responded to industry leaders and added special tools for the design and analysis of 5G and of other wireless transmitters.

 
MEASUREMENT

07/12/2016

Contact
info@speag.swiss

 

New DAK-TL Demonstration

Watch our recent product video demonstrating the latest advancement of our Dielectric Assessment Kit product line. DAK-TL brings automated precise measurements of dielectric permittivity, conductivity and homogeneity of boards, sheets, foils and small samples of tissues or liquids to your bench – giving you results in seconds.

 
MEASUREMENT

17/11/2016

Contact
info@speag.swiss

 

DASY6 and cSAR3D Regulatory Acceptance: SAR Standards Move Forward

SPEAG is very happy to provide you with an update of the IEC 106 Standard Meetings in Hangzhou, China, together with exciting new data regarding the performance and regulatory acceptance of DASY6 and cSAR3D.

 
MEASUREMENT

02/11/2016

Contact
info@speag.swiss

 

User Video Shows Unrivaled Repeatability of cSAR3D Fast SAR Test System

User Video Shows Unrivaled Repeatability of cSAR3D Fast SAR Test System

 
CORPORATE

26/09/2016

Contact
info@speag.swiss

 

EUMW, October 4 – 6, 2016: We look forward to welcoming you to our booth (Hall S11, Booth 134)!

SPEAG will exhibit at EuMW conference (Hall S11, Booth 134) in London, UK to display and demonstrate new products and solutions optimized for the demanding applications in the wireless, automotive, aerospace, and defence industries. 

 
CORPORATE

30/08/2016

Contact
info@speag.swiss

 

SPEAG Provides State-of-the-Art Phantoms for the World's Fastest GPS Air Performance Test for Wearable Devices

Verkotan has developed a real over-the-air GPS field test environment into the test laboratory. The test (patent pending) has been developed in close collaboration with the Centre for Wireless Communication (CWC) at University of Oulu, the VTT Technical Research Centre of Finland Ltd, and SPEAG. It allows the testing of a device’s total GPS air performance (chipset, mechanics, and antenna) in one test run.

 
MEASUREMENT

05/08/2016

Contact
info@speag.swiss

 

cSARD6 – Taking SAR Measurements to the Next Level

SPEAG is pleased to announce the release of cSARD6 in Q4 2016, the smart SAR testing solution. cSARD6 integrates cSAR3D with DASY6 and adds new features to create a fully automated and powerful SAR compliance system. This is the most advanced SAR measurement system available today, combining speed and versatility, while maintaining full SAR testing capabilities and compatibility to any of the worldwide standards.

 
SIMULATION

18/07/2016

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn V16.0 Released

The SEMCAD X Team is pleased to announce the release of SEMCAD X Matterhorn V16.0, an update of SEMCAD X Matterhorn  V15.6.

 
Page 12 of 29
 
 
Latest News