Swissmade
NEWS
29/07/2020
MEASUREMENT

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG’s two new mmWave ½SAM phantoms are optimized for testing mobile phone and other ear-mounted devices in talk mode at frequencies from 6 to >100 GHz and meet the quiet zone and weight restrictions of mmWave CATR and OTA chambers.

With the release of the new mmWave ½SAM right and left head phantoms, SPEAG is extending the frequency coverage from <0.3 – 6 GHz to 0.3 – >100 GHz, thus allowing its customers to perform reliable and repeatable over-the-air (OTA) performance evaluations of devices including 5G New Radio Frequency Range 2 and any other mmWave wireless operating systems. The mmW-½SAMR/L-V11 packages consist of the right or left head phantom, the mounting structure, a 6-degree positioning mask, and our universal talk-mode fixtures compatible with all of our talk-mode hands. Each package:

  • is fully compliant with the target values of current and future CTIA test plans and the reflection properties of the human skin for frequencies >100 GHz;
  • is optimized for use in compact antenna test ranges (CATR) or other chambers for OTA evaluations with a 30 cm quiet zone or larger;
  • has a half-head geometry compliant with SAM data as defined by IEEE, 3GPP, and CTIA and is available for right and left-hand usage, whereas the deviation to the full SAM head phantom is <0.2 dB for frequencies >6 GHz;
  • is light weight with only 2.5 kg.

The new mmW-½SAMR/L-V11 phantom packages are an advanced solution for passive and active OTA testing from 6 to >100 GHz.

To receive a quotation or for further information, please contact us at info@speag.swiss.

MEASUREMENT

14/03/2017

Contact
info@speag.swiss

 

New OTA Phantom Optimized for Testing Head-Mounted Wearables

SPEAG’s new OTA phantom SAM V4.6BSE provides maximum flexibility for testing wearable devices mounted to the head.

 
MEASUREMENT

07/03/2017

Contact
info@speag.swiss

 

Quick cSAR3D Measurement of Wireless Device

Fast SAR measurements are easier than ever! Watch a new user video demonstrating the features of cSAR3D V2.8.

 
MEASUREMENT

28/02/2017

Contact
info@speag.swiss

 

cSAR3D Measurements in Great Demand

China Telecommunication Technology Labs-Terminals (CTTL-Terminals), China’s premier wireless testing authority, is now routinely applying SPEAG’s vector measurement-based array system cSAR3D for pre-compliance evaluations of wireless devices for several of China’s manufacturers.

 
MEASUREMENT

25/02/2017

Contact
info@speag.swiss

 

Brief Update: IEC 62209 Standard Meeting Exceeds Expectations

cSAR3D closes the gap between innovation and Compliance.

 
MEASUREMENT

21/02/2017

Contact
info@speag.swiss

 

New Holder Adaptor Eliminates All Steps on Testing Its Influence on SAR

The new low-loss low-permittivity adaptor eliminates all steps on testing the holders influence on SAR measurements.

 
MEASUREMENT

02/02/2017

Contact
info@speag.swiss

 

Making Waves: Revolutionary Probe for 5G

The novel EUmmWV2 probe enables precise very close near-field measurements for frequencies up to 110 GHz.

 
CORPORATE

01/02/2017

Contact
info@speag.swiss

 

Zurich43 Retreat 2017 at Pilatus Kulm - Communication

Twenty-five Zurich43 associates and three IT'IS Foundation board members gathered in the historic Hotel Pilatus-Kulm high above Luzern 30 – 31 January 2016 for their annual retreat, this year on communication. The goal of the two-day retreat was to find ways to improve communication skills across various target groups, channels, and markets, both within Z43 and with the outside world.

 
MEASUREMENT

27/01/2017

Contact
info@speag.swiss

 

cSAR3D Cal Lab

SPEAG invests in the future of dry SAR testing systems: New standards drive dedicated Cal Lab

In order to comply with the requirements of the upcoming IEC 62209/ Part 3 SAR testing standards, SPEAG has set up a dedicated laboratory for calibrating ‘dry’ SAR testing systems at their manufacturing facility located in the heart of Zurich. The laboratory complements their already existing and well-established ‘wet’ SAR system service centre.

 
CORPORATE

24/01/2017

Contact
info@speag.swiss

 

X-TRA, X-TRA! Inaugural Zurich43 Party: X-TRAordinary Nine = X-TRAordinary Fun!

The 2017 Z43 annual party held at Zurich’s X-TRA concert hall celebrated the emerging corporate identity and global reach of the Z43 brand.

 
CORPORATE

23/01/2017

Contact
info@speag.swiss

 

EMPIR-Funded Project: Metrology for Inductive Charging of Electric Vehicles

SPEAG is a partner on the recently approved EMPIR-funded project “Metrology for Inductive Charging of Electric Vehicles”.

 
Page 11 of 29
 
 
Latest News