Swissmade
NEWS
21/01/2020
MEASUREMENT

EASY6 - DASY6 Technology for Any Setup

SPEAG’s redesigned Exposure Acquisition SYstem V6 (EASY6) offers maximal flexibility, ease of use, and customized integration of up to 16 of SPEAG's E-/H-field, SAR, and temperature probes to help you achieve precision in your daily laboratory measurement tasks.

In response to increased demand for high-precision electric (E-) and magnetic (H-) field and specific absorption rate (SAR) measurements in customized setups, SPEAG released EASY6. With EASY6, we provide our customers with an easy-to-use solution to manage the application of SPEAG's miniature multi-purpose near-field probes for direct field measurements or for integration in your own automated measurement system. EASY6 is optimally suited for monitoring and controlling strong radiofrequency (RF) fields and/or hostile electromagnetic (EM) environments found, e.g., in open-sites, anechoic chambers, EM compatibility laboratories, reverberation chambers, as well as in clinical and biomedical applications.

SPEAG’s highly resistive diode-loaded probes are known to be the most accurate probes for measurement of RF E- and H-fields, SAR, and temperature. The probes are connected to the shielded data acquisition electronics (EASY6-DAE) that is both smaller and lighter than its predecessor EASY4-DAE. EASY6-DAE processes the sensor data and communicates via a custom-made optically active cable – which can be up to 20 m in length – with the remote unit (EASY6-RU) connected via USB to a PC. Two EASY6-DAEs can be connected to each EASY6-RU at the same time. Furthermore, the current EASY6 software simultaneously supports up to eight different EASY6-RUs, i.e., up to 16 probes.

The plug-and-play system is configured for use with the intuitive EASY6 software (EASY6-SW-V1). Any measurement profiles can be defined, and all measured data can be exported. It also has a powerful application programming interface (API) that allows the integration of EASY6 into any custom-made measurement setup for automated measurements.

Curious about how it works? Check out our EASY6 video below and visit our EASY6 webpage to learn more about the specifications.

 

To request a quotation or for further information, please contact us at info@speag.swiss.

 

MEASUREMENT

15/03/2011

Contact
info@speag.swiss

 

Golden Validation Device

The Golden Validation Device is a very stable, reliable and easy-to-use calibrated reference source for SAR and OTA measurements. It is a stand-alone device that can be used anywhere without connection to a network. The antenna is well-matched under different loading conditions to provide a reliable output.

 
SIMULATION

10/02/2011

Contact
semx-support@speag.swiss

 

SEMCAD X v14.4.3 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.4.3, an update of SEMCAD X Aletsch v14.4.

 
SIMULATION

25/01/2011

Contact
semx-support@speag.swiss

 

Three Papers Selected as Highlights of 2010 by the Journal Physics in Medicine and Biology Relied on SPEAG's Advanced Products SEMCAD X & DASY52 NEO

Three papers relying on SPEAG's products in the execution of their studies were among the 30 articles selected by the journal Physics in Medicine and Biology as the Highlights of 2010

 
MEASUREMENT

17/01/2011

Contact
info@speag.swiss

 

iSAR² V2.3 Software Release

Fast SAR measurements are now faster than ever (less than one second).  Also, combined SAR evaluation of simultaneous transmitters and new flexibility for comparison of iSAR² measurements with DASY or other iSAR² measurements have been introduced. This further cuts the time spent on quality assurance, prototype evaluation and pre-compliance testing of wireless devices.

 
SIMULATION

02/01/2011

Contact
semx-support@speag.swiss

 

Exhibitions and Workshops 2011

SPEAG will be exhibiting at the following conferences and exhibitions this year. If you would like to arrange a demo or meeting, or are interested in attending a technical workshop, please send an email to semx-support@speag.swiss.

 
MEASUREMENT

31/12/2010

Contact
info@speag.swiss

 

DASY52 Software Release V52.6

We are pleased to announce a new release of DASY52. This release not only resolves reported bugs, but also incorporates important new features that result in reduced measurement time, more flexibility and implementation of new measurement protocols arising from the IEC/IEEE standardization committees. Furthermore, many features have been added for the DASY52NEO users.

 
MEASUREMENT

26/11/2010

Contact
info@speag.swiss

 

iSAR Discounts & Packages

Due to the popularity of our iSAR² systems and the expanding choices of accessories and calibrations, SPEAG announces new discounts and packages for iSAR². This includes discounts on systems and accessories, calibration packages and a special package with SEMCAD X ANTENNA.

 
SIMULATION

18/10/2010

Contact
semx-support@speag.swiss

 

SEMCAD X V14.4.0 Aletsch

The SEMCAD X Team is pleased to announce the release of SEMCAD X V14.4.0 Aletsch, a major upgrade offering a range of powerful new Solutions, Modules and features, more robust handling as well as new customization options.

 
SIMULATION

07/09/2010

Contact
semx-support@speag.swiss

 

SEMCAD X v14.2.4 Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.2.4, an update of SEMCAD X Aletsch v14.2.

 
SIMULATION

07/09/2010

Contact
semx-support@speag.swiss

 

SEMCAD X Student Research Award 2009 Winners

Schmid & Partner Engineering AG (SPEAG) is very pleased to announce the winners of SEMCAD X Student Research Award 2009.

 
Page 24 of 27
 
 
Latest News