Swissmade
NEWS
23/02/2021
SIMULATION

SEMCAD X Matterhorn Release V19.2

SPEAG is pleased to announce the release of SEMCAD X Matterhorn V19.2, our full-wave 3D electromagnetic (EM) simulation software and specialized subpackage of Sim4Life

The new version not only comes with an improved user experience and a smoother look and feel but also with important new features, refinements, and bug fixes.

New features include:

  • 5G Transmitter Design and Evaluation: user-defined codebooks (incl. phase configuration uncertainty) is part of our Maximum Exposure Optimizer which now supports synchronized features with DASY8/6 Module mmWave and full compatibility with FDIS of IEEE/IEC 63195-1 and 63195-2

  • IP protection: effective collaboration while protecting intellectual properties (IP) of key active and passive components based on a unique Huygens source feature; we are proud to announce that we will extend this solution in the next release such that it will not require IP protected simulation models of 3rd party modules but instead imports measured fields, i.e., model validation will become unnecessary and the simulation uncertainty will be even lower.

  • WPT R&D and compliance testing: enhanced functionality for simulating induced electric fields from measured data (DASY8/6 Module WPT), enabling large phantom and model simulations by avoiding errors from boundary effects during the Magneto-QuasiStatic (MQS) simulations.

  • Productivity Tools: improved Python 3 and VSCode extensions, making it easier to write, run and debug Python scripts from VSCode in SEMCAD X.

Finally, the new release also comes with additional productivity features and general improvements as well as bug fixes, making your simulations once again more effective.

Feedback, as always, is greatly welcome – we listen!


5G Simulation Toolbox Enhancements

5G SIMULATION TOOLBOX AND mmWAVE COMPLIANCE ASSESSMENT

In SEMCAD X Matterhorn V19.2, numerous powerful enhancements have been added to the power density evaluators and post-processing of the 5G Simulation Toolbox.

  • The Power Density Evaluator has been updated to the latest version of the IEEE/IEC 63195-2 and 63195-1 standards; it includes minor changes in the naming of the different averaging definitions and additional features such as the ability to perform square-like averaging on curved surfaces.

  • The Power Density Evaluator can now automatically pad the input fields with zeros, to be fully consistent with the DASY8/6 system.

  • The Maximum Exposure Optimizer (MEO) now supports user-defined codebooks. Multiport simulation results of phased arrays that operate under a known list of phase configurations (i.e., with a codebook) can be used to quickly determine the maximum peak surface-averaged power density (mpsPD) across all configurations. Using an exhaustive search approach, the algorithm determines the mpsPD following the latest version of the IEEE/IEC 63195-2 standard, with no over-estimation.

  • Codebooks that carry some uncertainty on the actual phase configurations achieved by the device (phase shifters are never ideal!) can still be used with MEO. Optimization methods will be used to search for mpsPD within the range of uncertainty of each configuration.

  • Since the release of SEMCAD X V19.0 and Sim4Life V6.0, DASY8/6 measurements of phased arrays can be easily imported. In SEMCAD X V19.2 and Sim4Life V6.2, the algorithm that reconstructs absolute phase references of each independent measurement, so far only available for the DASY8/6 system, is also available. This makes the interoperability between the two measurement and simulation systems complete and seamless.

5G Toolbox of SEMCAD X

5G Simulation Toolbox in SEMCAD X Matterhorn V19.2: Maximum peak power density mpsPD is computed across all 55 configurations of the codebook of a 25 GHz validation device. 


Solvers: Important New Features 

IMPORT/EXPORT HUYGENS SIMULATIONS FOR ENHANCED COLLABORATION

SEMCAD X Matterhorn V19.2 adds an important feature to export/import a simulation field sensor and use it as a Huygens source to simulate exposure scenarios, e.g., by including dedicated phantoms.

  • Electromagnetic fields of any finite-difference time-domain simulation can now be exported as a standalone Huygens source file. The resulting file contains field data in a chosen field sensor and can be reused in any other project as an incident field source for a Huygens simulation.

  • This feature makes it easy to split simulations of source fields (e.g., antennas) and exposure scenarios (e.g., phantoms) into several independent SEMCAD X (or Sim4Life) projects.

Huygens Import?Export

SEMCAD X Matterhorn V19.2 Huygens field export/import in action (5G, compliance):Project 1: full-wave simulation of fields radiated at 28 MHz by 5G phone with results exported as Huygens file; Project 2: power density absorbed by head phantom using Huygens file as incident field. 


WPT Compliance Assessment

INTEROPERABILITY ENHANCEMENTS: SEMCAD X - DASY8/6 MODULE WPT & MAGPy

Since the release of V19.0, SEMCAD X Matterhorn allows to import measured magnetic fields from DASY8/6 Module WPT and use these to simulate the induced electric field and peak spatial specific absorption rate (SAR) inside a conductive phantom. In SEMCAD X V19.2, important functionality enhancements have been added:
  • The imported magnetic fields measured with the MAGPy probe used in DASY6/8 Module WPT can now be extrapolated to "infinity" on all sides.
  • This enables large phantom model simulations in SEMCAD X (or, e.g., Virtual Population (ViP) models in Sim4Life) by avoiding errors from boundary effects during the MQS simulations – and thus supporting large real-world computations by feeding your measured data to SEMCAD X’s MQS solver.
WPT Compliance Assessment

Simulation of SAR from currents induced in Virtual Population model Duke by a WPT charging coil; magnetic field measurements are imported from the MAGPy probe of  DASY8/6 Module WPT.


Productivity & Performance Tools 

GUI: FRESH LOOK AND FEEL

  • SEMCAD X Matterhorn V19.2 appears with a polished UI design, providing an overall new fresh and streamlined look and feel.

  • In addition, V19.2 now natively supports high DPI screens.

SEMCAD X GUI SEMCAD X Matterhorn V19.2’s polished UI design that also natively supports high DPI screens.


PYTHON 3 & VSCODE

  • VSCode, with its rich ecosystem of third-party extensions, provides a feature-loaded environment for writing Python scripts. It supports Jupyter notebooks and seamlessly connects to SEMCAD X’s Python kernel.

  • SEMCAD X’s own VSCode extension has been improved, making it easier to write, run and debug Python scripts from VSCode in SEMCAD X, even in the case of multiple running SEMCAD X instances. One can now also easily enable/disable the two-way link between a SEMCAD X instance and VSCode at the click of a button.

  • The VSCode extension also provides a convenient way to install and manage third-party Python packages, making it a convenient environment for developing scripts or applications with SEMCAD X’s Python API.

A Python script running from VSCode interacts synchronously with the GUI of SEMCAD X Matterhorn V19.2, allowing step-by-step execution and powerful debugging features.


A more comprehensive list of improvements, fixes, and new features is included in the Release Notes.

To experience the power and elegance of SEMCAD X Matterhorn V19.2 or for further information, please email us at semx-sales@speag.swiss or call us at +41 44 245 9700.

The relevant SEMCAD X Matterhorn installers for Win7/Win8/8.1/Win10 64-bit platforms can be downloaded here. Existing customers with an up-to-date annual maintenance and support plan will receive individually all pertinent information regarding the software installer download and updated licenses.

SPEAG is committed to empowering our customers to reach new heights of productivity and scientific achievement by providing outstanding innovative software solutions, testing equipment, and service.

We strongly recommend that users upgrade SEMCAD X to the full Version of Sim4Life. If interested, please request a special upgrade price.

The SEMCAD X Matterhorn and Sim4Life Teams


SIMULATION

29/01/2014

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn

 SPEAG and ZMT recently released the internal beta version of SEMCAD X Matterhorn to an enthusiastic reception from our partners.

 

 
CORPORATE

15/01/2014

Contact
info@speag.swiss

 

IT'IS/Speag/ZMT Retreat in Bergün on Winning and Failing Strategies and Mindsets

Twenty-two IT'IS, Speag, and ZMT co-workers retreated for two days, 13 – 14 January 2014, to the Kurhaus Bergün, a grand old Jugendstil-era hotel in the Albula region of canton Graubünden. Their mission: to learn about the strategies and mindsets that impact workplace productivity and success, as well as winning and failing strategies and mindsets implemented by leaders, empires, and industries.

 
CORPORATE

31/12/2013

Contact
info@speag.swiss

 

Successful SPEAG exhibtions and workshops during 2012

SPEAG successfully participated on multiple international conferences and exhibitions during 2012.

 
CORPORATE

13/12/2013

Contact
info@speag.swiss

 

Successful SPEAG Workshops in Tokyo

SPEAG and ZMT held a successful and well-attended hardware & software workshop in Tokyo, Japan on December 13th, 2013.

 
MEASUREMENT

10/12/2013

Contact
info@speag.swiss

 

cSAR3D Production Release

SPEAG is excited to announce the series production of cSAR3D, the next generation in fast and high-precision SAR measurement equipment. We will start shipping in January, increasing to two full cSAR3D systems per month during Q1 2014. In January, we will also have available our extensive cSAR3D performance evaluation and DASY52 comparison study of over 40 wireless devices of different  manufacturers. More information is now available on our product page.

 
SIMULATION

25/11/2013

Contact
semx-support@speag.swiss

 

SEMCAD X v14.8.5 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.8.5, an update of SEMCAD X Aletsch v14.8.

 
MEASUREMENT

21/11/2013

Contact
info@speag.swiss

 

New Product: Hand-Forearm Phantom

SPEAG Announces Release of New Hand-Forearm Phantom for Wrist-Mounted Devices

 
CORPORATE

14/11/2013

Contact
info@speag.swiss

 

Robotics Research Rocks - 2013 National Future Day

Nine curious young people spent Thursday, November 14 visiting our team at the IT’IS, SPEAG, and ZMT laboratories for the 2013 National Future Day.

 
MEASUREMENT

01/11/2013

Contact
info@speag.swiss

 

New DAKS Training Videos

Learn more about the newest addition to our dielectric spectroscopy product line, Dielectric Assessment Kit System (DAKS), in these short videos. The first video describes the advantages and usage of this portable and compact system. The second video offers a simple, step-by-step guide on how to install and operate the system.

 
CORPORATE

11/10/2013

Contact
info@speag.swiss

 

Successful Annual SPEAG Workshop in Korea

Following a tradition for almost 15 years, Dymstec and SPEAG have conducted another very successful annual workshop in Korea featuring a series of bright new stars.

 
Page 20 of 30
 
 
Latest News