Swissmade
NEWS
25/06/2020
CORPORATE

Z43 Goes Carbon Dioxide-Free

As part of our effort to help create a sustainable and healthier future, energy at Z43 is now 100% renewable, which will lead to a reduction in CO2 emissions of more than 60,000 m3 per year – corresponding to about twenty times the CO2 footprint of the average Swiss.

For the past 20 years, we have produced the heating energy for the Z43 headquarters in Zurich – home to the IT’IS Foundation, Schmid & Partner Engineering AG, and ZMT Zurich MedTech AG – as well as supplied adjacent residential buildings with more than 79 apartments with natural gas. Our labs, on the other hand, were cooled via a small heat pump powered by electricity. Though gas is “cleaner” than oil or coal, we strongly felt that it was time to switch from fossil fuels to renewable sources of power in order to run our work lives more sustainably.

niels roof panels web

niels basement heating web

So we finally got rid of the gas burners in our basement and invested heavily in a new energy system. The newly installed 500 kW heat pump now heats and cools the various buildings by exchanging heat with the groundwater stream that runs 30 m below our premises. In addition, because our labs and servers produce more heating energy than we can use during the summer, we replaced the warm-water panels on the roof with photovoltaic cells to generate our electric power. We also took care to only subscribe to companies that exclusively generate electricity by hydro, wind, and solar power. This complements our internal policy that Z43 staff should only commute by car to work in exceptional circumstances (e.g., it was appropriate to do so during the COVID-19 pandemic).

We are proud that we have started to generate our own energy and have become largely CO2-free at Z43.

Curious how it looks? Check out our CO2-free energy production by clicking on the leaf:

leaf slogan mm3

The leaf can also be found in the header of any of our webpages: IT’IS Foundation, SPEAG, ZMT, and Zurich43.

Z43 – Think Renewable!

MEASUREMENT

22/05/2019

Contact
info@speag.swiss

 

FCC Update on MAIA usage in cDASY6

We are pleased to announce that SPEAG received FCC's official confirmation on full acceptance of MAIA as well as further guidance on the reporting.

 
MEASUREMENT

20/05/2019

Contact
info@speag.swiss

 

Release of cDASY6 Module mmWave V1.6.2

SPEAG announces release of the intermittent cDASY6 Module mmWave V1.6.2.

 
MEASUREMENT

16/04/2019

Contact
info@speag.swiss

 

First Whole-Body Phantom WBBDuke for DASY6

With the release of whole-body back phantom WBBDuke, SPEAG’s DASY6 is ready to demonstrate SAR compliance in specific phantoms for any IoT devices.

 
MEASUREMENT

01/04/2019

Contact
info@speag.swiss

 

mmWAVE Phantom for DASY6 Systems

SPEAG released the mmWAVE phantom in direct response to the need for evaluating the power density distributions on any of the six faces of wireless devices.

 
MEASUREMENT

26/03/2019

Contact
info@speag.swiss

 

Update from FCC on 5G NR sub-6GHz NSA SAR Measurements

SPEAG is committed to continuously supporting and guiding the wireless industry through the rapid 5G development. 

 
CORPORATE

01/03/2019

Contact
info@speag.swiss

 

SPEAG Exhibition at MWC19 in Barcelona

Busy times at the SPEAG booth at the Mobile World Congress in Barcelona where our experts discussed the measurement needs of our customers on simulation tools to verification of electromagnetic nearfield measurement problems.

 
MEASUREMENT

19/02/2019

Contact
info@speag.swiss

 

Release of cDASY6 Module mmWave V1.6

SPEAG released the cDASY6 Module mmWave V1.6 with many small but important new features that make compliance testing and documentation easier and faster.

 
CORPORATE

29/01/2019

Contact
info@speag.swiss

 

Great Interest in Joint SPEAG / Vitec Exhibition and Workshop at Automotive World 2019 in Tokyo

Successful exhibition and workshop by SPEAG and VITEC at the Automotive World Conference 2019 in Tokyo, Japan.

 
CORPORATE

23/01/2019

Contact
info@speag.swiss

 

Zurich43 Retreat 2019 on Ethics & Z43 Culture

Zurich43's annual retreat was held 21 – 22 January 2019 to discuss "Ethics & Z43 Culture in Real or Perceived Devaluing Times" with a particular focus on fairness, justice, recognition, and populism.

 
SIMULATION

27/11/2018

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn New Release V17.4

With the release of SEMCAD Matterhorn V17.4, SPEAG achieves another milestone by being the first manufacturer to offer a robust and effective method for estimating the maximum exposure of antenna arrays of any size on any arbitrary surface as required by the latest standards drafts.

 
Page 4 of 28