Swissmade
NEWS
May 17, 2022
MEASUREMENT

DASY8/6 Module HAC V1.2: Packed with New Features

Simplified procedures, additional viewer options, and more: SPEAG has further improved the user experience when testing compatibility with DASY8/6 Module HAC V1.2 between a wireless device and hearing aids according to ANSI C63.19-2019.

After the successful launch of the first version of our hearing aid compatibility module, DASY8/6 Module HAC V1.0, in November 2021, SPEAG has further improved the features and workflow of the module based on valuable customer feedback. Streamlined procedures and improved visualizations now make it easier and smoother to demonstrate compliance with ANSI C63.19-2019.

Compatibility with Windows 10/1

Module HAC V1.2 supports the latest hardware revision of the Audio Magnetic Measurement Instrument (AMMI). Based on the Roland Rubix22 USB audio interface, it is fully compatible with Windows 10/11.

Simplified Procedure

In Module HAC V1.2, the hearing aid compatibility test arch position and probe calibration results are persistent. It is no longer necessary to import them after restarting the Jupyter notebook – the last used values are automatically restored.

AngleCalibration

System response during probe angle determination

 

Automated Calculation of Codec / System Delay

The audio signal emitted by the wireless device under test may be delayed due to the codec latency. In Module HAC V1.2, this parameter no longer needs to be evaluated manually: it is now determined automatically in post-processing.

Additional Viewer Options

The field viewer comes with many new features: for example, users can now edit the color bar range and export all displayed data. In addition, the spectrally weighted undesired magnetic noise can now be visualized.

FieldViewer

H-field distribution for a Telephone Magnetic Field Simulator (TMFS) measured in transverse orientation. The color bar range is editable

 

Intuitive Communication System User Interface

The communication system selection has also been further improved: the layout is more user-friendly and the most frequently used test channels (low/middle/high) are more prominently highlighted.

CommunicationSystems

Selection of the communication system to be measured

 

Improved Post-Processing of Undesired Audio Band Magnetic Field

The post-processing algorithm for evaluating the undesired magnetic field in the audio band has been improved to avoid overestimation of when low-frequency components dominate.

 

DASY8/6 Module HAC V1.2, together with the updated manuals, can be downloaded here.

Your feedback helps us to constantly improve our products and services. If you have thoughts and suggestions, please reach out to us at support@speag.swiss.

For further information on DASY8/6 Module HAC V1.2 or any of our other products, please contact us at info@speag.swiss or via any of our sales channels.

 

MEASUREMENT

Oct 12, 2009

Contact
info@speag.swiss

 

Successful CTIA Audits of SPEAG Head and Hand Phantoms

SPEAG OTA phantoms with accessories were successfully tested during first CTIA V3-0 audits at ETS Lindgren, Austin on October 1st and Qualcomm, San Diego on October 9th.

 
MEASUREMENT

Sep 25, 2009

Contact
info@speag.swiss

 

iSAR² Calibration is ISO/IEC 17025 Accredited

Schmid & Partner Engineering AG (SPEAG) is now accredited for iSAR calibration to the rigorous ISO/IEC 17025 quality standards. ISO/IEC 17025 is a laboratory quality standard that is widely recognized internationally. The addition of iSAR calibration to the SPEAG quality system provides a large portfolio of products for which SPEAG provides accredited calibration.

 
SIMULATION

Aug 17, 2009

Contact
info@speag.swiss

 

Dellsoft as New SEMCAD X Reseller in India

Schmid & Partner Engineering AG (SPEAG) is pleased to announce a new partnership with Dellsoft Technologies, who will now act as a reseller of SEMCAD X in India. Dellsoft is a leading technical software company in India. Dellsoft's vision is to  achieve international standards of excellence and to be the leading supplier of technical software, learning programs, and other teaching platforms. Many years of experience in the software business and a strong technical support team will facilitate their efforts in providing SEMCAD X to companies in India. 

 
SIMULATION

Jul 6, 2009

Contact
info@speag.swiss

 

SEMCAD X Student Research Award 2008 Winner Presentations

The SEMCAD X Student Research Award for 2008 prizes were presented to the winners during the June 2009 IEEE International Symposium on Antennas and Propagation (APS/URSI), in Charleston, SC, USA.

 
SIMULATION

Jul 1, 2009

Contact
semx-support@speag.swiss

 

SEMCAD X Student Research Award 2008 Winners

Schmid & Partner Engineering AG (SPEAG) is very pleased to announce the winners of SEMCAD X Student Research Award 2008.

 
SIMULATION

May 29, 2009

Contact
semx-support@speag.swiss

 

Release of SEMCAD X Aletsch V14.0

Encapsulating solution oriented technologies combined with the latest Acceleware Batuco drivers, SEMCAD X V14.0 Aletsch defines a new standard in high performance EM and Thermal simulation.

 
SIMULATION

May 29, 2009

Contact
semx-support@speag.swiss

 

SEMCAD X in Nature Magazine

The results of a recent study using SEMCAD X have been published in the latest Nature magazine.

 
MEASUREMENT

Feb 18, 2009

Contact
info@speag.swiss

 

iSAR² V2.0 Release

During the last 12 months we have completely redesigned the iSAR GUI and added many new functions. The iSAR software V2.0 is now released to all of our customers free of charge.

The series production of iSAR Head has begun and we already enjoy high demands. Please order now!

 
MEASUREMENT

Jan 30, 2009

Contact
info@speag.swiss

 

HAC T-Coil Update for DASY5/4.7

DASY5 V5.0/4.7 have been updated to satisfy  our customers request to visualize HAC T-Coil measurements to 10 kHz.

 
SIMULATION

Dec 31, 2007

Contact
info@speag.swiss

 

Exhibitions and Workshops 2007

SPEAG exhibited at the following conferences and exhibitions in the year 2007. 

 
Page 31 of 32
 
 
Latest News