Swissmade
NEWS
May 17, 2022
MEASUREMENT

DASY8/6 Module HAC V1.2: Packed with New Features

Simplified procedures, additional viewer options, and more: SPEAG has further improved the user experience when testing compatibility with DASY8/6 Module HAC V1.2 between a wireless device and hearing aids according to ANSI C63.19-2019.

After the successful launch of the first version of our hearing aid compatibility module, DASY8/6 Module HAC V1.0, in November 2021, SPEAG has further improved the features and workflow of the module based on valuable customer feedback. Streamlined procedures and improved visualizations now make it easier and smoother to demonstrate compliance with ANSI C63.19-2019.

Compatibility with Windows 10/1

Module HAC V1.2 supports the latest hardware revision of the Audio Magnetic Measurement Instrument (AMMI). Based on the Roland Rubix22 USB audio interface, it is fully compatible with Windows 10/11.

Simplified Procedure

In Module HAC V1.2, the hearing aid compatibility test arch position and probe calibration results are persistent. It is no longer necessary to import them after restarting the Jupyter notebook – the last used values are automatically restored.

AngleCalibration

System response during probe angle determination

 

Automated Calculation of Codec / System Delay

The audio signal emitted by the wireless device under test may be delayed due to the codec latency. In Module HAC V1.2, this parameter no longer needs to be evaluated manually: it is now determined automatically in post-processing.

Additional Viewer Options

The field viewer comes with many new features: for example, users can now edit the color bar range and export all displayed data. In addition, the spectrally weighted undesired magnetic noise can now be visualized.

FieldViewer

H-field distribution for a Telephone Magnetic Field Simulator (TMFS) measured in transverse orientation. The color bar range is editable

 

Intuitive Communication System User Interface

The communication system selection has also been further improved: the layout is more user-friendly and the most frequently used test channels (low/middle/high) are more prominently highlighted.

CommunicationSystems

Selection of the communication system to be measured

 

Improved Post-Processing of Undesired Audio Band Magnetic Field

The post-processing algorithm for evaluating the undesired magnetic field in the audio band has been improved to avoid overestimation of when low-frequency components dominate.

 

DASY8/6 Module HAC V1.2, together with the updated manuals, can be downloaded here.

Your feedback helps us to constantly improve our products and services. If you have thoughts and suggestions, please reach out to us at support@speag.swiss.

For further information on DASY8/6 Module HAC V1.2 or any of our other products, please contact us at info@speag.swiss or via any of our sales channels.

 

MEASUREMENT

Oct 28, 2014

Contact
info@speag.swiss

 

ICEy (Interference & Compatibility Evaluation System) Release

SPEAG is excited to announce the introduction of our novel ICEy Interference & Compatibility Evaluation system, another decisive leap forward in EMC/EMI near-field scanning technology.

 
MEASUREMENT

Oct 17, 2014

Contact
info@speag.swiss

 

ISO/IEC 17025 Accreditation for Calibration

ISO/IEC 17025 Accreditation for Calibration of cSAR3D and TDS Awarded!

 
MEASUREMENT

Aug 16, 2014

Contact
info@speag.swiss

 

cSAR3D Demo Video and Accreditation & Software Release Schedule

With the steady shipment of one cSAR3D FLAT unit per week successfully underway, SPEAG is now ready to ramp up cSAR3D HEAD production with the goal of also shipping three to four calibrated HEAD units per month. A demo video highlighting the exceptional functionality and user-friendliness of the system, including the new camera modules, is now available.

 
SIMULATION

Aug 1, 2014

Contact
semx-support@speag.swiss

 

ZMT Zurich MedTech AG: Sim4Life V1-0 Released

Four years in the making, the next great alliance between engineering, medicine, technology, and design was forged with the launch of our new revolutionary simulation platform Sim4Life V1-0.

 
MEASUREMENT

Jul 14, 2014

Contact
info@speag.swiss

 

cSAR3D V1-2 Release

SPEAG is pleased to announce the release of cSAR3D software version 1.2.  New features include improved 3D extrapolation, continuous measurement mode, and several enhancements of the graphical user interface. We are in full production with deliveries of two to four units per month.

 
SIMULATION

Jul 10, 2014

Contact
semx-support@speag.swiss

 

SEMCAD X v14.8.6 Update Release

The SEMCAD X Team is pleased to announce the release of SEMCAD X v14.8.6, an update of SEMCAD X Aletsch v14.8.

 
CORPORATE

Jul 8, 2014

Contact
info@speag.swiss

 

SPEAG at MEDIX in Tokyo

ZMT Zurich MedTech AG and SPEAG joined Japanese partner PTT Company Limited as exhibitors at the 5th Medical Device Development & Manufacturing Expo (MEDIX) in Tokyo, June 25 – 27, 2014.

 
MEASUREMENT

Jul 3, 2014

Contact
info@speag.swiss

 

New DAK Software Version 1.12

SPEAG is delighted to announce the latest release of our DAK software, Version 1.12. The new and improved features and tools of this release accelerate dielectric measurements and optimize data evaluation.

 
CORPORATE

May 30, 2014

Contact
info@speag.swiss

 

Successful 2014 Workshops in China

SPEAG and ZMT continued this year their tradition of hardware & software workshops in China.

 
CORPORATE

May 26, 2014

Contact
info@speag.swiss

 

IEEE Biomedical Electronics EMC Symposium in Taipei

Auden Techno Corp. sponsored the IEEE Biomedical Electronics EMC Symposium in Taipei, Taiwan on May 23 during which they exhibited key products of SPEAG and Sim4Life of ZMT.

 
Page 20 of 32
 
 
Latest News