Swissmade
NEWS
02/09/2021
MEASUREMENT

New API for MAGPy V1.0

Simple and powerful: The new application programming interface of MAGPy V1.0 allows the programming and easy integration in customer-specific applications in complex environments.

With the new application programming interface (API) of SPEAG’s Magnetic Amplitude and Gradient Probe System (MAGPy) V1.0, only a few lines of codes are required to enable:

  • complex scanning with a robot, e.g., below a car or inside the car  
  • remote or long-term monitoring of field levels
  • monitoring in high field strength or hazardous environments
  • applications where the field is to be measured at several peak frequencies under automated control


The MAGPy-API is available in the MAGPy 1.0 Desktop application from version 1.0.36.

Further information about MAGPy V1.0 can be found here.

Contact info@speag.swiss or any of our sales channels to request an upgrade, for further information, or to receive a quotation.


MEASUREMENT

13/01/2020

Contact
info@speag.swiss

 

New Notice by Canadian Government: Currently Not Adopting IEC 62209-3

The Canadian Government issued a Notice on January 8, 2020 clarifying its position on the acceptance of SAR measurement standards for wireless device certification. It has reviewed the new IEC 62209-3 standard and concluded that it is currently not adopting this standard.

 
SIMULATION

18/12/2019

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Release V18.2

With the release of SEMCAD X Matterhorn V18.2, we are introducing new features and extensions that are also implemented and applied in cDASY6. 

 
MEASUREMENT

16/12/2019

Contact
info@speag.swiss

 

Release of cDASY6 Module mmWave V2.0.2

SPEAG announces the release of cDASY6 Module mmWave V2.0 maintenance release

 
MEASUREMENT

12/12/2019

Contact
info@speag.swiss

 

What to Expect After the Publication of IEC 62209-3

Recent Publication of IEC 62209-3 has Raised Questions and Renewed Interest in Regulatory Acceptance of Vector Measurement-Based Systems for SAR Compliance Testing.

 
CORPORATE

02/12/2019

Contact
info@speag.swiss

 

Z43 Jubilees – “Let the Good Times Roar!

On Friday, 29 November 2019, Z43 hosted their annual party in “roaring twenties” style to celebrate the 20th anniversary of IT’IS and the 25th jubilee of SPEAG!

 
MEASUREMENT

16/10/2019

Contact
info@speag.swiss

 

DASY6 V6.10 Packed with Innovation: SAR/PD at 6 – 10 GHz, 5G NR Signals, and Full FCC Acceptance

DASY6 V6.10 is the first system on the market that supports SAR measurements between 6 ‒ 10 GHz, estimates epithelial power density (IEEE) or transmitted power density (ICNIRP) values, and includes 5G NR signals.

 
CORPORATE

10/10/2019

Contact
info@speag.swiss

 

5G Solutions Exhibited at EuMW 2019 in Paris

Successful show for SPEAG at the European Microwave Week in Paris, France, October 01 ‒ 03, 2019.

 
MEASUREMENT

08/10/2019

Contact
info@speag.swiss

 

OH4VNA: Accurate and Reliable S11 Parameter Measurements of Mobile Device Antennas

Watch our latest video to learn how to measure accurately and reliably the reflection coefficient (S11) of mobile device antennas with SPEAG’s OH4VNA system.

 
CORPORATE

24/09/2019

Contact
info@speag.swiss

 

Jubilee Hardware & Software Workshop 2019 in South Korea

DYMSTEC, SPEAG, and ZMT held their 20th annual hardware and software workshop in South Korea. The successful event featured several presentations, live demos, and product exhibitions, and was supported by a live English-Korean translation service.

 
SIMULATION

18/09/2019

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn V18.0.1 Release

SPEAG announced the release of SEMCAD X Matterhorn V18.0.1, an updated version of SEMCAD X Matterhorn  V18.0.

 
Page 4 of 30
 
 
Latest News