Swissmade
NEWS
02/09/2021
MEASUREMENT

New API for MAGPy V1.0

Simple and powerful: The new application programming interface of MAGPy V1.0 allows the programming and easy integration in customer-specific applications in complex environments.

With the new application programming interface (API) of SPEAG’s Magnetic Amplitude and Gradient Probe System (MAGPy) V1.0, only a few lines of codes are required to enable:

  • complex scanning with a robot, e.g., below a car or inside the car  
  • remote or long-term monitoring of field levels
  • monitoring in high field strength or hazardous environments
  • applications where the field is to be measured at several peak frequencies under automated control


The MAGPy-API is available in the MAGPy 1.0 Desktop application from version 1.0.36.

Further information about MAGPy V1.0 can be found here.

Contact info@speag.swiss or any of our sales channels to request an upgrade, for further information, or to receive a quotation.


MEASUREMENT

10/12/2020

Contact
info@speag.swiss

 

DAK-TL2 – New Technology Inside Our Dielectric Measurement System for Thin Layers

Breakthrough in computational electromagnetics by the IT’IS Foundation leads to SPEAG’s second-generation device for dielectric characterization of samples with limited size or volume.

 
MEASUREMENT

24/11/2020

Contact
info@speag.swiss

 

cDASY6 Module WPT Release – Our New MAGPy Technology for DASY6

SPEAG’s new cDASY6 Module WPT is the first-ever solution to demonstrate compliance with the basic restrictions of any magnetic source according to the latest IEC/IEEE63184 DPAS draft. The module is based on SPEAG’s new MAGPy product line.

 
MEASUREMENT

10/11/2020

Contact
info@speag.swiss

 

Use of DASY6 for Devices Operating at 6 – 10 GHz

In October, FCC issued new interim procedures for demonstrating compliance between 6 – 10 GHz. Just a few weeks later, we are happy to provide a scientifically rigorous solution that enables DASY6 users to meet these new requirements.

 
SIMULATION

27/10/2020

Contact
semx-support@speag.swiss

 

SEMCAD X Matterhorn Major Release V19.0

SPEAG are pleased to announce SEMCAD X Matterhorn V19.0, our full-wave 3D electromagnetic (EM) simulation software and specialized subpackage of Sim4Life V6.0.

 
MEASUREMENT

01/09/2020

Contact
info@speag.swiss

 

cSAR3D V4.0: A Breakthrough in Array System Technology

With the release of cSAR3D V4.0, SPEAG introduces the novel X10 Combiner for high-resolution measurements. It enables SAR and absorbed power density testing from 6 – 10 GHz while also improving the overall measurement accuracy..

 
MEASUREMENT

18/08/2020

Contact
info@speag.swiss

 

cDASY6 Module WPT Pre-Release – Our New MAGPy Technology for DASY6

SPEAG’s new cDASY6 Module WPT is the first-ever solution to demonstrate compliance with the basic restrictions of any magnetic source according to the latest IEC/IEEE63184 DPAS draft. The module is based on SPEAG’s new MAGPy product line.

 
MEASUREMENT

29/07/2020

Contact
info@speag.swiss

 

mmWave ½SAM Phantoms Extend OTA Testing in CATR for 5G FR2 Devices

SPEAG releases the new mmW-½SAMR/L-V11 phantom packages for over-the-air testing at frequencies from 6 to >100 GHz.

 
MEASUREMENT

28/07/2020

Contact
info@speag.swiss

 

Publications Confirm: DASY6 is the Most Accurate SAR System

Scientific debate corroborates that SPEAG's DASY6 probe-scanning system has low measurement errors (<3%) for simple antennas and provides further support of the robustness of the latest IEC 62209 standard

 
MEASUREMENT

22/07/2020

Contact
info@speag.swiss

 

DASY6 and cSAR3D: Detailed Guidance for 5G NR FR1

Two new Application Notes provide detailed guidelines for testing 5G NR FR1 radios using DASY6 and cSAR3D. Also, SPEAG’s calibration lab just received ISO/IEC 17025 accreditation.

 
CORPORATE

25/06/2020

Contact
info@speag.swiss

 

Z43 Goes Carbon Dioxide-Free

SPEAG is getting greener! We have installed a new energy system consisting of solar panels and a groundwater-based heat pump. We are proud that we have started to generate our own power and have become largely CO2-free.

 
Page 2 of 30
 
 
Latest News