3-Unit cSAR3D System 

The 3-unit cSAR3D System includes a flat phantom for body-worn measurements (meeting both IEC and FCC specifications for tissue-simulating medium) and the left and right sides of the SAM head phantom, described in more detail below:

1 cSAR3D Flat HSL or MSL

• Filling: Broadband Head or Body Simulating Medium
• including Calibration (650 MHz – 6 GHz)
• extended Calibration (6 GHz – 10 GHz) available
• including Validation according to IEC 62209-3
• extended Validation (300 MHz – 650 MHz) available

1 cSAR3D Left Head

• Filling: Broadband Head Simulating Medium
• including Calibration (650 MHz – 6 GHz)
• including Validation according to IEC 62209-3
• extended Validation (300 MHz – 650 MHz) available
• Integrated Mounting Device for Hand-Held Transmitters, Left

1 cSAR3D Right Head

• Filling: Broadband Head Simulating Medium
• including Calibration (650 MHz – 6 GHz)
• including Validation according to IEC 62209-3
• extended Validation (300 MHz – 650 MHz) available
• Integrated Mounting Device for Hand-Held Transmitters, Right

1 Set of Low-Loss, Low Permittivity Masks for cSAR3D Left and Right Heads

• 1 cSHL15MV3 - Left 15° Mask
• 1 cSHR15MV3 - Right 15° Mask

2 Sets of Low-Loss, Low Permittivity Rugged and Foam Spacers for cSAR3D Flat

• 1 cSF1SV5 - 1 mm Rugged Spacer
• 2 cSF2SV5 - 2 mm Rugged Spacers
• 1 cSF5SV5 - 5 mm Rugged Spacer and 1 cSF5SV4 - 5 mm Precise Foam Spacer
• 1 cSF10SV5 - 10 mm Rugged Spacer and 1 cSF10SV4 - 10 mm Precise Foam Spacer
• 1 cSF15SV5 - 15 mm Rugged Spacer and 1 cSF15SV4 - 15 mm Precise Foam Spacer

1 Tablet Positioner V2

1 Set of cSAR3D Verification Dipoles

• 1 D835V2 - cSAR3D Verification Dipole, calibrated for Flat HSL (& MSL) at 835 MHz; values in the Head Phantom also provided
• 1 D1950V3 - cSAR3D Verification Dipole, calibrated for Flat HSL (& MSL) at 1950 MHz; values in the Head Phantom also provided
• 1 D2450V2 - cSAR3D Verification Dipole, calibrated for Flat HSL (& MSL) at 2450 MHz; values in the Head Phantom also provided
• 1 D5GHzV2 - cSAR3D Verification Dipole, calibrated for Flat HSL (& MSL) at 5200 and 5800 MHz; values in the Head Phantom also provided 
• 1 cSAR3D Verification Dipole Spacer, 15 mm
• 3 cSAR3D Verification Dipole Spacers, 10 mm

1 Set of Verification Accessories

• 1 VMLV1 - Verification Mask for cSAR3D Left Head V1
• 1 VMRV1 -Verification Mask for cSAR3D Right Head V1
• 1 VAHV1 - Verification Antenna Holder for cSAR3D Heads V1
• 1 VDSV1 - Verification Dipole Stand for cSAR3D Flat/Quad V1

1 Broadband Power Source for RF Sources containing:

• 1 POWERSOURCE1 V1 - Broadband USB-fed source V1
• 1 USB Cable
• 1 Power Bank Battery Module (including cable)

1 MAIA - Modulation & Audio Interference Analyzer (including USB cable)

1 ANT - Wideband Communication Antenna (including HF cable)

3 CAMOV1 - Overhead Camera Module for cSAR3D Left, Right or Flat V1

• 1 Camera Post with Integrated Lamp, USB Hub and Power Supply
• 1 Power Supply Cable
• 1 USB Cable

1 Desktop PC including Color-Monitor

• High-end specifications, CCC certification

1 cSAR3D Software V5.x and License

1 cSAR3D System Manual

3 cSAR3D Power Supplies with Power Cables

3 USB Cables

1 USB License Dongle